Bang & Olufsen BeoSound Essence Mode D'emploi page 9

J
Pairing status indicator
– Blue (flashing): The pairing status
indicator flashes blue when in
pairing mode.
– Blue (solid): The pairing status
indicator is solid blue shortly
when a remote control is paired.
– Orange (solid): The pairing status
indicator is solid orange shortly
when pairing fails. Make sure that
your BeoSound Essence is within
range of your BeoSound Essence
Remote.
K
RESET
To return to factory settings, you
can reset your BeoSound Essence.
You cannot perform a factory reset
if the network status indicator is
flashing red or white.
> Use a small pin, such as a
straightened paper clip to press
and hold the RESET button for 10
seconds until the indicator light
switches off.
> The product status indicator on
the front and the network status
indicator are solid orange shortly.
> BeoSound Essence restarts
automatically and is reset to
factory settings.
Cable cover
Run cables using the cable cover.
Ensure that cables are not placed
in front of the buttons. To release
the cable cover, press on both
sides.
Wall mounting
Use the cable cover for mounting
on the wall, see page 7.
Technical specifications, features
and the use thereof are subject to
change without notice.
9