– Replace the lid of the infuser basket
– Press the infusion time selection button
infusion time: 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 7 min, 8 min,
9 min or 10 min
Note: Your tea will automatically be infused at the pre-selected
temperature.
– Once the infusion time is reached, the tea maker stops and beeps
twice
(diagram 14).
Note: It is possible to start the cycle before the automatic start by
pressing the on/off button.
– So that the tea is not over-infused, remove the infuser basket from
the teapot and replace the lid
served
(diagram
C. Keep Warm function
Once your tea is infused, it is possible to keep the pre-selected
temperature (maximum 95°C) for the time you desire.
– Replace the teapot on its control base
– Press the Keep Warm selection button
time: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours or 8
hours. Once the Keep Warm function has finished:
– The tea maker stops and beeps twice.
D. Shut-down and standby
If no cycle is ongoing and if no buttons are pressed, the machine goes
automatically into standby mode and switches off after 5 minutes.
The machine can be switched on again simply by pressing the on/off
button.
If you wish to switch the machine off manually, press and hold the on/
off button.
(diagram
16).
(diagram 12).
(diagram
13), select the
15), your tea is ready to be
(diagram 17).
(diagram
18), select the
EN
11