Axis P3346-VE Guide D'installation page 15

AXIS P33-VE Series Network Camera Installation Guide
AXIS P3346-VE/AXIS P3367-VE:
6.
The capture mode must be set the first time the
network camera is accessed. Select the desired
capture mode from the drop-down list and click OK.
Note:
The capture mode can be changed later from the prod-
uct's web pages, but this will reset most other settings.
For more information, see the online help or User's
Manual.
7. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video
stream in Internet Explorer. You will need administrator rights on the computer to do this.
Note:
To install AMC in Windows 7/Windows Vista, you must run Internet Explorer as administrator.
Right-click the Internet Explorer icon and select Run as administrator.
Power Line Frequency
Note:
Only applicable to AXIS P3384-VE
Power line frequency is set the first time the Axis product is accessed and can only be changed by
resetting the product to factory default.
Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting
the wrong frequency may cause image flicker if the product is used in fluorescent light
environments.
Note:
When using 50 Hz, the maximum frame rate is limited to 25 fps.
Note:
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually
used; most other parts of the world use 50 Hz. Local variations may apply, always check with the
local authorities.
Page 15