Removable Wings; Shoulder Bolsters - broda Elite Tilt Recliner Manuel D'utilisation

3.6

Removable Wings

Wings support the Shoulder Bolsters which provide
upper body lateral support to the resident.
To Remove the Wing:
-Depress the top button (1) and pull the wing from the
receptacle. The wing may be moved out of the way
without its full removal.
-To completely remove the wing, depress the bottom
button (2) and remove from the receptacle.
To Insert the Wing:
- Insert the lower end of the wing into the lower
receptacle.. Then insert the upper end into the upper
receptacle. Ensure the wing is secured in place.
3.7

Shoulder Bolsters

The Shoulder Bolsters provide upper torso support,
protection and containment and accommodate
asymmetries in the chair user. Their unique design
allows for proper elbow access to the arm rest. The
Shoulder Bolster is always used in conjunction with the
side wing.
To Attach the Shoulder Bolsters:
-Feed both Shoulder Bolster straps between the inner
strap of the wing and the frame of the chair.
-Secure the buckles and cinch the straps to secure the
bolster to the wing. The bolster can be slid up and down
the wing if desired.
Note: The Shoulder Bolster can be inverted on the wing
in order to provide support to narrower residents.
13
1
2