Cleaning And Care; After Sales Service; Frequently Asked Questions; Optional Accessories - Miele S 5001 Instructions D'utilisation

en

Cleaning and care

,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a
damp cloth or a cleaner suitable for
plastics.
,
Do not use abrasive, oil-based,
glass or all purpose cleaners!
Dust compartment
The dust compartment can, if
necessary, be cleaned using a dry
cloth, dusting brush or a second
vacuum to remove any dust.
Monitor the FilterBag change indicator
and inspect all filters regularly. Clean or
replace them when necessary
according to these Operating
Instructions.
,
Do not submerge the vacuum in
water! If moisture gets into the
appliance there is the risk of electric
shock.

After sales service

In the event of a fault which you cannot
fix yourself please contact the Miele
Service Department at the phone number
listed on the back of this booklet.
^ Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
18

Frequently asked questions

What if the vacuum turns off
automatically or a warning light ,
comes on? See fig. 36
The vacuum has overheated. The tem-
perature limiter automatically turns the
vacuum off. Some models also have a
warning light , which comes on to in-
dicate that the vacuum has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Turn the vacuum
off and pull the plug from the outlet.
^ Check for any blockages and allow
the vacuum to cool for 30 minutes.

Optional accessories

Always follow the flooring
manufacturer's cleaning and care
instructions.
You can order these and many other
products via the Miele website.
Some models come with the one or
more of the following accessories.
Powerbrushes
To connect a Powerbrush, you also
need :
– Electro telescopic wand SET 210 or
SET 220
– Electro hose SES 119
Models designed for use with a Power-
brush have a release button on the
cover cap to the connection socket.