GETTING STARTED
Please read all the instructions in this owner's manual. Keep this manual in a safe place for future reference if necessary. The owner's manual includes:
01
IMPORTANT INFORMATION (PAGE 1)
This section is provided to record important information
about your SUP. This information will come in handy if you
need to contact our customer service department.
02
WARRANTY REGISTRATION CARD (PAGE 10)
As outlined in the warranty section on page 9, you can register your
warranty electronically at www.pelicansport.com. You can also mail
the completed warranty registration card available on page 10.
03
MANUFACTURER'S DECLARATION OF ORIGIN (PAGE 9)
Foreign governments may require a Manufacturer's Declaration of
Origin. Complete the form available on page X if you need one.
04
MATERIALS/MANUFACTURING
This pelican SUP is made with the twin sheet
thermoforming (TST) technology that shapes
the deck and hull and fuses them together under
extreme heat and pressure. We use our exclusive
multi-layered RAM-X
which is a lighter
TM
and higher density material.
The result is a more rigid, more durable, impact resistant product than
those made with other technologies and low/medium density polyethylene.
TRANSPORTATION
05
You can easily transport your SUP with the carrying handles located
at the front, rear or center.
3
/ BY HAND: Carry the board by using the carrying handles.
If necessary, use a transport cart to help with the transport.
/ By VEHICLE: When strapping to the top of your car, place the SUP
underside up.
Placing the topside up may generate wind drag and instability
when driving. Placing the front or the back of the SUP forward
are both acceptable.
Over tightening straps may result in pressure dings. Use padded
straps instead of non-padded nylon straps.
IMPORTANT INFORMATION
Avoid keeping the SUP firmly attached to your vehicle for an extended
period of time, particularly when exposed to the sun. This could create
distortions in the hull over time.
PRE-LAUNCH CHECKLIST
06
/ Always wear a proper personal flotation device (PFD).
/ Always have an emergency safety kit on hand as required
by applicable laws (whistle, etc.).
/ Ensure to remove the hardware used to attach the SUP during transport.
/ Ensure the vent cap is firmly in place.
/ Ensure the length of your paddle is properly adjusted for your height
(see details described in «Basic SUP Principles» on page 4).