Output Screen - Panasonic GP-VD150E Mode D'emploi

Setting the menu items
w Output screen
w
Ou tp ut
Form at
Down C ON V. M o d e
HDMI C ol or
Retu rn
Format [1080/50i, 576/50p]
The video format is changed on this screen.
For details on how to change the format, refer to
"Changing the format" (page 25).
Down CONV. Mode
[Squeeze, SideCut]
The down-conversion mode is selected here.
When the 4:3 aspect ratio has been
set for the monitor screen, t
are squeezed horizontally and extended
vertically changing the view of the angle.
Squeeze
With the vertical height serving as the
reference, the parts which extend beyond
this at the two sides are cropped changing
the view of the angle.
SideCut
1 0 8 0 / 5 0 i
S q u e e z e
Y C b C r 4 2 2
he images
24 (E)
HDMI Color
[RGB-NOR, RGB-ENH, YCbCr422, YCbCr444]
Set here is the HDMI colour output.
p When an HDMI monitor is used, use "YCbCr422"
under normal circumstances.
p In cases where, for instance, HDMI (RGB) signals are
converted and output to a DVI monitor, the settings
required will differ depending on the colour gradation
supported by the monitor.
RGB-NOR The RGB output signals are output in
the 16 to 235 range.
RGB-ENH The RGB output signals are output in
the 0 to 255 range.
p If the black parts of the images appear overexposed
when "RGB-NOR" has been selected, use the "RGB-
ENH" setting instead.
p Conversely, if the images are displayed with a loss of
dark detail when "RGB-ENH" has been selected, use
the "RGB-NOR" setting instead.
Note
w p If an HDMI Color setting which is not supported by
the monitor has been specified, the HDMI Color
setting may be changed automatically.
(The menu display will remain unchanged.)
Return
Use this to return to the previous menu.