Contrast Screen - Panasonic GP-VD150E Mode D'emploi

Setting the menu items
w Contrast screen
w
Co nt rast
Cont ra st Mod e
Con tr as t Le v e l
Shu tt er Mod e
St ep /S ynch r o
Fr am e Mix
Au to F. Mix M a x G a i n
Gain
AGC Ma x Gain
Retu rn
Contrast Mode [Auto, Manual]
This item is used to select whether the image brightness
(contrast) is to be controlled automatically or manually.
Auto: The iris, shutter speed and frame addition
are controlled and the camera brightness is
adjusted automatically.
Manual: Operations are performed using the manually
set values.
Switching between the contrast modes is also possible by
pressing the [A/IRIS] and [M/IRIS] buttons on the wireless
remote controller.
Contrast Level [–5 to +5]
Set here is the contrast level when the image brightness
is adjusted.
This item can be set when "Auto" has been selected as
the "Contrast Mode" setting.
Shutter Mode [Off, Step, Synchro]
Select for camera shutter speed.
This item can be set when "Manual" has been selected as
the "Contrast Mode" setting.
Off: The shutter is set to OFF (so that it cannot be
tripped).
Step: The step shutter is set (the steps can be
changed).
Synchro: The synchro shutter is set (the setting can be
changed continuously).
Step/Synchro
This is used to adjust the shutter speed in the mode
which was selected as the "Shutter Mode" setting.
When a higher shutter speed is selected, fast-moving
subjects do not become blurred easily but the images will
be darker.
The shutter speeds that can be set are listed below.
When "Step" is selected as
the "Shutter Mode"
1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
A u t o
0
- - - -
- - - -
- - - -
0 d B
A u t o
1 8 d B
When "Synchro" is selected
as the "Shutter Mode"
50.20 Hz to max. 538.51 Hz
(255 steps)
20 (E)
Frame Mix [Auto, Off, 6dB, 12dB, 18dB]
Select for frame addition (gain-up using sensor storage)
amount.
This item can be set when "Off" is selected as the
"Shutter Mode" item setting.
When frame addition is performed, it will appear as if the
images are missing some frames.
AutoF. Mix Max Gain
[0dB, 6dB, 12dB, 18dB]
When "Auto" for the "Contrast Mode" or "Auto" for the
"Frame Mix" is selected, the maximum frame addition
amount can be set.
If frame addition is performed at the Auto setting, it will
appear as if the images are missing some frames.
Gain [Auto, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward;
conversely, in locations which are too bright, adjust it
downward.
When "Auto" is set, the light quantity is adjusted
automatically.
The noise increases when the gain is increased.
Switching the gain is also possible by pressing the
[OFF], [LOW], [HI] and [AUTO] buttons for [GAIN] on the
wireless remote controller.
AGC Max Gain [6dB, 12dB, 18dB]
When "Auto" is selected as the "Gain" setting, the
maximum gain-up amount can be set.
Return
Use this to return to the previous menu.