Storage - INVENTOR WC24BT Manuel D'utilisateur

Defrosting Process
Water drops, or possible frost may be accumulated in the rear of the unit when the
compressor is operating, this is normal operation. There is no need for wiping off these
water drops or frost, as the defrosted water will be collected into the drain tank and then
lead in the water disposal pan, located above the compressor, and will be vaporized.

10. STORAGE

When appliance is inactive for an extended period of time, please make sure you follow the
instructions below, for the appropriate storage of your appliance:
• Turn the unit off allowing one day before storage.
• Remove all the items from the interior compartment.
• Clean the removable parts of the device.
• Leave the door open to prevent unpleasant odors.
• Cover the device.
• Store the wine cooler in upright position, in a dry, well ventilated area and avoid direct
sunlight.
EN
• Do not use abrasive products, abrasive cleaning pads,
solvents or metal objects. Do not use water spray and
steam to clean the appliance.
• Do not use extreme moist cleaning pads. Any moisture
around the electric components, should be avoided.
• The use of a steam cleaner is prohibited, as this may
be very dangerous.
• Never use sharp or metal objects to remove frost
while defrosting
• Do not use any mechanical devices or instruments to
accelerate the defrosting process prior to consulting
the manufacturer
15