Cleaning And Care; Cleaning The Lint Filter; Emptying The Water Tank - orima ORC-81 Mode D'emploi

6. CLEANING AND CARE

IMPORTANT: Do not use industrial
chemicals to clean your dryer. Do not use a
dryer that has been cleaned with industrial
chemicals.

6.1. Cleaning the Lint Filter

IMPORTANT: DO NOT FORGET TO
CLEAN THE LINT FILTER AFTER EACH
USE.
To clean the lint ilter:
1
3
1. Open the loading door.
2. Pull up the lint ilter to remove it.
3. Use your hands or a soft cloth to clean
the lint.
4. Close and reit the lint ilter.
2
4
EN - 19
After the dryer has been used for a certain
period of time, if you encounter a layer that
will cause obstruction on the ilter surface,
wash the ilter with warm water to clean the
layer. Dry the ilter thoroughly before
reinstalling it again.

6.2. Emptying the Water Tank

1
2
1. Pull the drawer cover and carefully take
out the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the
discharge cap in the tank, clean it with
water.
4. Reit the water tank.