Programme Progress Indicator; Drum Light Information - orima ORC-81 Mode D'emploi

5.2.3. Programme Progress Indicator

The programme follow-up indicator shows
the progress of the programme running. At
the beginning of each programme step, the
relevant indicator LED comes on and the
LED of the completed step goes of.
Drying:
• It remains on during the whole drying
process until the drying level reaches
"Cooling".
Cooling:
• It lights up when the drying level
reaches "Cooling" and remains on until
the next step.
End:
• It lights up at the end of the
programme.
During the Programme
If you open the door when the programme
is running, the product will switch to standby
mode. Once the door has been closed,
press the Start/Pause key to resume the
programme.
Do not open the loading door when the
programme is running. If you have to open
the door, do not keep it open for a long
time.
Programme End
Once the programme is over, the warning
LEDs for Start/Pause, water tank level, ilter
cleaning and condenser cleaning will turn
on. Additionally, an audible warning will be
given at the end of the programme. You can
remove the laundry to make the machine
ready for a new load.
IMPORTANT: Clean the lint ilter after
every programme. Empty the water tank
after every programme.
IMPORTANT: If you do not take out the
laundry after the programme has ended, the
1-hour Anti Crease phase will automatically
be activated. This programme rotates the
drum at regular intervals to prevent creases

5.3. Drum Light Information

• This product includes LED Drum Light.
The light works automatically when you
open the door. And closes itself after a
while automatically.
• It is not an adjustable option for user to
open or close it.
• Please do not try to replace or modify
the LED Light.
EN - 17