Publicité
Les langues disponibles
Les langues disponibles
INDICATOR LIGHTS
The FlexClean® All-In-One Floor Cleaner is equipped with a helpful
indicator light system designed to quickly alert you of issues while
cleaning. The FlexClean
All-In-One Floor Cleaner is equipped with two
®
different indicator lights: BRUSH JAM and LOW SOLUTION. The two
different indicator lights are located behind the DIRTY WATER TANK.
The
BRUSH JAM INDICATOR LIGHT
is triggered
when everyday items (such as socks, small toys etc.)
become lodged into the BRUSH ROLL, jamming and
preventing the BRUSH ROLL from spinning. When the
machine detects a jam, the brush motor will shut off
and the BRUSH JAM INDICATOR LIGHT will illuminate.
The BRUSH JAM INDICATOR LIGHT system protects the
machine and prevents belt burn-out.
Removing Brush Roll Jam
1
Illuminated
Indicator Light
The BRUSH JAM
INDICATOR LIGHT
will illuminate if the
machine detects
a BRUSH ROLL jam.
2
Access the Brush Roll
Turn off the machine and unplug the machine from the
power outlet.
Remove water tanks.
Gently position the
machine on its side
to access the
BRUSH ROLL.
3
Remove the Jam
Gently remove jammed item
from the BRUSH ROLL.
Once jammed item is
removed, place the machine
upright. Replace both tanks,
plug in machine and press
POWER BUTTON to desired
cleaning mode.
16
F L E X C L E A N® A L L - I N - O N E F L O O R C L E A N E R
TOP VIEW
Brush
Low
Roll Jam
Solution
Indicator
Indicator
Light
Light
The
LOW SOLUTION INDICATOR LIGHT
will
illuminate if the machine detects the CLEAN WATER
TANK is depleted or empty. The LOW SOLUTION
INDICATOR LIGHT system protects the machine and
prevents pump burn-out that could occur if the
machine runs dry/without solution.
Low Solution Indicator Light
1
Illuminated Low
Solution Light
The LOW SOLUTION
INDICATOR LIGHT
will illuminate if the
machine detects
the CLEAN WATER
TANK is empty.
2
Add Cleaning Solution
Refer to "Fill the Clean
Water Tank" Instructions
on Page 10.
3
Now You Are
Ready To Clean
|
U s e r M a n u a l
CLEANING AND STORING
1
Turn The Machine Off
Push the POWER SWITCH to the "OFF"
position.
3
Rinse The Clean Water Tank
Press the CLEAN WATER
TANK RELEASE button and
remove the CLEAN WATER
TANK from the machine.
Rinse thoroughly with warm
water.
Allow tank to dry thoroughly
to prevent odor when
stored. Replace on the
machine when ready.
5
Store The Machine
Move the machine to a closet
or storage place.
DO NOT place or store the
machine on floors that may be
damaged by water.
r u g d o c t o r . c o m
|
1 - 8 0 0 - 7 8 4 - 3 6 2 8
2
Unplug The Power Cord
Unplug the POWER CORD from the outlet and wrap it
around the POWER CORD WRAP.
4
Empty The Dirty Water
Remove the DIRTY WATER TANK
using the TANK HANDLE.
Rinse the inside of the DIRTY
WATER TANK thoroughly with
warm water.
Allow tank to dry thoroughly to
prevent odor when stored.
Replace on the machine when
ready.
Refer to "Emptying the DIRTY
WATER TANK" instructions on Page 15
for additional deep cleaning details.
17
Publicité
