Télécharger Imprimer la page

ARDES TK22 Mode D'emploi page 6

Rechaud eletrique

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1 - Cast-iron hotplate
2 - Control switch
3 - Power-on light
4 - Handle
This product has been manufactured in conformity to current 2014/35/EC and 2014/30/EC.
Technical data indicated on the appliance.
The first time that you use the appliance, let it warm up for 5 minutes to eliminate all traces of
moisture.
Use pots with a base of the same size as the plate or larger.
Use flat-bottomed pots.
While cooker is in use, be sure to keep the power cable well away from any hot surfaces.
The appliance is equipped with an adjustable thermostat to increase/decrease the temperature of
the plates.
The pilot lamp of the plate being used stays on until the set temperature is reached. Once the
temperature falls below the value set with the knob, the pilot lamp lights up again.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use substances, liquids or excessively dampened cloths because any infiltrations could damage the
appliance beyond repair.
NEVER IMMERSE THE APPLIANCE IN WATER.
Dry carefully the appliance before to put it back.
Periodically make sure the power cord is not cut or burnt since it is near to the hot plate. If the cable should have
been damaged, do not use the appliance, remove the plug and contact an authorized after sales service centre.
6
Technical informations
Instructions for use
Maintenance
1
3
GB
2
4
GB
GB

Publicité

loading