EarthWise QI-JY-1300 Manuel De L'utilisateur page 8

Auxiliary handle (Fig. 2)
Loosen the knob and lift up the handle to the operating
position. Adjust the height of the handle to a safe and
comfortable position and secure with the knob.
2
Position the auxiliary handle so that the holes are in
alignment with the holes in the handle support bracket.
Insert the M6X50 hex head bolt into the hex shaped bolt
hole of the bracket.
Adjust the angle and height of the handle to a safe and
comfortable position.
Secure by tightening the knob onto the bolt.
ASSEMBLY
Connecting the electrical cord (Fig. 3)
Loop the extension cord and feed it through the rear
handle. Rest the cord around the cord hook. This will
help prevent you from disconnecting the extension cord
from the product during operation.
3
B
M6X50
WARNING: Do not handle the plug or the snow
thrower with wet hands or while standing in water.
DANGER: Electric shock can cause serious injury
or death.
8