Operation; Using The Menu; Changing The Operating; Language - Hama 00095216 Mode D'emploi

Operation

Using the menu

GB
Changing the operating language
40
The device is equipped with a user-friendly menu. The menu appears
on the screen.
You open the main menu using the "MENU" button. In the menu, use
the "◄►" buttons to move around, and select the desired function.
When you confirm your selection by pressing "Enter", a corresponding
submenu appears. Use the "►" button to go to the submenu. Again,
use the "▲" or the "▼" button to move around, and select the desired
line. The selected line is highlighted in colour.
Confirm your selection using the "Enter" button. Usually, an additional
menu will then appear, in which you move around using the "◄►▼▲"
buttons and select the desired setting.
Use "Menu" to exit the current menu level.
For orientation purposes, the menu structure is also included in the
Appendix.
You can control the device using the buttons on the rear or with the
included remote control.
The operating language is set to German at the factory. To change this
setting, proceed as follows:
Press "Menu" button on remote control unit.
Select "Menu Language" – "OSD" and then the desired operating
language, and confirm your selection by pressing the "Enter"
button.
Exit the menu by pressing the "Menu" button on the remote control.