Dörr SL-480 SET Notice D'utilisation page 14

08 | MOUNTING AND EXAMPLES FOR APPLICATION
08.1 Mounting on the light stand
Mount the ring light on the light stand (16) by placing the bracket (04) onto the spigot (16a). Tighten the locking screw (04a).
CAUTION: To avoid tilting of the ring light, align the ring light over a widely spread tripod leg. Make sure that the light
stand stands on an even and dry ground.
Loosen the locking screw for the tilt function (03) and set the desired illumination angle.
08.2 Examples for application
To mount the ball head (13), the smartphone holder (14) or the mirror, slide the respective flash shoe (13b, 14b, or 15b) in one of the
universal hot shoe mounts (1) at the ring light. Screw down the locking screws (13, 14a or 15a).
09 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Turn off the device and disconnect from power source or remove batteries before cleaning. Store
the device in a dust-free, dry and cool place. This device is not a toy - keep it out of reach of children. Keep away from pets.
14 doerr-foto.de