Harbor Breeze C-TR56BNK3D1R Mode D'emploi page 6

INITIAL INSTALLATION
2.
Determine mounting method to use.
A. Standard mount
B. Angle mount
Note: Flushmount and closemount options are not
available for this fan.
IMPORTANT: If using the angle mount, ensure the
ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 10 ft. high or higher. For taller
ceilings you may want to use a longer downrod
(sold separately). Angle-style mounting is best
suited for angled or vaulted ceilings. A longer
downrod is sometimes necessary to ensure proper
blade clearance.
Check to make sure blades (N) will be at least
3.
30 in. from any obstruction and at least 10 ft.
above the floor.
4.
Loosen two canopy mounting screws (G) and
canopy mounting washers (F) in slotted holes
of canopy (B) and remove the other two canopy
mounting screws (G) and canopy mounting
washers (F); save for later use.
Twist canopy (B) and remove mounting bracket
(C).
2
A
19° max.
B
3
4
F
G
6
30 in.
min.
N
10 ft.
min.
C
F
G
B