Care And Maintenance - Harbor Breeze C-TR56BNK3D1R Mode D'emploi

OPERATING INSTRUCTIONS
Operation buttons on the panel of the remote control
3.
transmitter:
3 button
2 button
1 button
0 button
button
Tap button quickly to turn lights off or on. Hold
button down to increase or decrease lights. If you
press button in excess of 0.7 seconds, it
becomes a dimmer. The lights vary cyclically in
8 seconds. The light button has an auto resume
function, which keeps the light at the same
brightness as the last time it was turned off.

CARE AND MAINTENANCE

At least twice each year, lower canopy (B) to check downrod (A) assembly, and then tighten all
screws on fan. Clean motor housing (D) with only a soft brush or lint-free cloth to avoid scratching the
finish. Clean blades (N) with a lint-free cloth. You may occasionally apply a light coat of furniture
polish to wood blades for added protection.
IMPORTANT: Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
• Total wattage for this fixture is 17 watts; do not attempt to replace the LEDs.
for fan HIGH speed
for fan MEDIUM speed
for fan LOW speed
to turn fan OFF
to turn light ON or OFF
3
Remote Control Transmitter
16