Technical instructions
4.2. Installation of the flange
Before mounting the product into the return fitting, install the flange (provided separately)
The flange has to be clipped on the product using the holes as shown below.
For plastic flange:
For stainless steel flange
1. Put the transparent part (1) on the stainless steel flange (2)
2. Put these parts (1 + 2) on the light (3)
Brio White and Color
The electrical connection must be performed in a
dry, sealed connection box with cable fittings that
must be tightened in order to avoid any water in-
filtration.
v1.0CAEN
ccei.ca
4