Rgb & Rgbw Lights: Use - Autonomous Mode; Cable Cross-Section; Projector Protection; Declaration Of Conformity - ccei Mini Brio + Notice Technique

Éclairage à led subaquatique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical information sheet
4. RGB & RGBW lights: Use - Autonomous mode
In the absence of a control unit, the bulbs operate autonomously and the user can choose between 18 modes: 11 colour sets
and 7 programs (with shorts cutting power supply).
Change of mode and reset
• A small cut of power supply (less than 1s) switches to the next colour / sequence. Once all the colours are displayed, the
light goes back to the first colour (pure white).
• A cut of supply (2s) resets the light synchronization and switches them to the second colours (blue)
• After a long stop (more than 4s) the light show the last displayed colour.
Fixed colours and available sequences
The colours and sequences are displayed in a preassigned order:
• 1 to 11 : fixed colours. 1.Pure white | 2.Blue | 3.Blue Lagoon |4.Cyan | 5.Violet | 6.Magenta | 7.Pink | 8.Red | 9.Orange |
10.Green | 11.Warm white
• 12 to 18 : sequences. 12.Fast gradient | 13.Slow rainbow | 14.Colours parade | 15.Techno rhythm | 16.Blue variations |
17.Random parade | 18. Ramdom colours

5. Cable Cross-Section

The voltage drop in the supply cable of the Mini
Brio + & Switch M7 & X8 cable should be lim-
ited in order to comply with the applicable stan-
dards and ensure optimal illumination.
Follow the table opposite (one projector per ca-
ble)
For references PK10R324 / 325 / 326 with 10 meters cable, decrease 10 meters on length given in the chart.

6. Projector Protection

Independent protection is necessary for each Mini Brio + & Switch M7 & X8 (even if several projectors are connected to the
same transformer). Protection must be ensured in the secondary of the transformer using fuses or breakers at 2A. The cable
cross-section must be adapted accordingly.
A. Declaration of conformity
declares that the Mini Brio + & Switch M7 & X8 product meets the safety and electro-
magnetic compatibility requirements of European directives 2014/35/EU and 2014/30/EU.
Date of sale: . . . . . . . . . . . . . . . . . . . . . . . Batch N°: . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mini Brio + & Switch M7 & X8
2,5 mm²
4 mm²
Max. length
(m)
15
25
Distributor's stamp
CROSS-SECTION (mm²)
6 mm²
40
60
Emmanuel Baret
Marseille, on 27/01/2021
v1.0EN
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Switch m7Switch x8Pk10r314Pk10r315Pk10r316Pk10r324 ... Afficher tout

Table des Matières