Transportation And Storage; Troubleshooting - GreenWorks CSF405 Manuel Opérateur

6 TRANSPORTATION AND
STORAGE
Before you move the machine, always
• Remove the battery pack from the machine.
• Keep hands clear of the lock-out button.
• Put the scabbard on the guide bar and the chain.
Before you put the machine into storage, always
• Remove all residual oil from the machine.
• Remove the battery pack from the machine.
• Clean all unwanted material from the machine.
• Make sure that the storage area is
• Not available to children.
• Away from agents which can cause corrosion, such as
garden chemicals and de-icing salts.
7

TROUBLESHOOTING

Problem Possible cause
The guide bar and The chain is too
the chain become tight.
hot and release
The oil tank is
smoke.
empty.
Contamination
causes a blockage
of the discharge
port.
Contamination
causes a blockage
of the oil tank.
Contamination
causes a blockage
of the guide bar
and the oil tank
cap.
Contamination
causes a blockage
of the sprocket or
guide wheels.
English
Problem
The motor runs
but the chain does
not rotate.
Solution
Adjust the chain
tension.
Add lubricants.
Remove the guide
bar and clean the
discharge port.
The motor runs
and the chain ro-
Clean the oil tank.
tates, but the chain
Add new lubri-
does not cut.
cant.
Clean the guide
bar and the oil
tank cap.
Clean the sprocket
and the guide
wheels.
9
Possible cause Solution
The chain is too Adjust the chain
tight. tension.
The guide bar and Replace the guide
the chain are dam- bar and the chain
aged. if it is necessary.
1. Remove the
battery pack
from the ma-
chine.
2. Remove the
guide bar cov-
er.
3. Remove the
bar and saw
chain.
The motor is dam-
4. Clean the ma-
aged.
chine.
5. Install battery
pack and oper-
ate the ma-
chine.
If the sprocket ro-
tates, it means the
motor works prop-
erly. If not, call
service center.
Sharpen or replace
The chain is blunt.
the saw chain.
Turn the chain
The chain is in the
loop to the other
incorrect direction.
direction.
The chain is tight Adjust the chain
or loose. tension.
EN