Purpose Of The Equipment / Improper And Forbidden Use - Zhermack furnace DM Serie Manuel De L'utilisateur

MAINTENANCE AND USE MANUAL
Fig. 5: On DM 1 and DM 1G ovens act on the main
switch by turning the dial clockwise.
Fig. 6: Press the main switch (16) positioned on the
display: the switch will light up.
• the word OFF appears on the display (11)
• the program number appears on the display (14)
• the number "1" appears on the display (15).
If the control panel is already on and there are four numbers on the display (11)
press the START-STOP key (20) immediately and the word OFF will appear on the
display (11).
Failure to observe any of the above equipment installation instructions may lead to
malfunctions and render the warranty null and void.

PURPOSE OF THE EQUIPMENT / IMPROPER AND FORBIDDEN USE

The ovens of the DM series have been designed to effect the firing and/or fusion of lining cylinders
used in odontotechny.
Using the equipment for any purpose other than that described in this Manual shall
be considered improper and thus forbidden.
The equipment must not be used to fire materials that generate smoke (e.g. waxes,
resins, plastics etc.).
Improper use renders the Warranty null and void and Zhermack shall not be liable for
any damages to objects, workers or third parties.
The main reasons for which the Warranty may be rendered null and void are given in section 2.2 and
in the "Warranty Certificate" enclosed with this Manual.
FURNACE DM
EN
5
Figure
6
Figure
6.6
159 of 272