Transport And Mounting - Zhermack furnace DM Serie Manuel De L'utilisateur

MAINTENANCE AND USE MANUAL
Should the oven you have purchased need to be moved it must first be fully disconnected from the
power supply and then left to cool completely. Proceed as follows:
1. close the oven chamber door;
2. gather all its accessories together;
Equipment handling for transport and/or packaging purposes must be carried out in compliance with
a few essential rules. These are as follows:
a. To handle and/or move the
equipment there must be at
least 2 (two) workers: they
must grip the unit securely
under its base.
3. Pack the equipment in its original box or, if this is not possible, take all the necessary precautions to
protect the equipment against knocks or drops, in that the goods are transported at the owner's risk.
Proceed cautiously, bearing in mind the size and weight of the unit (see section 4.1.1), so as to prevent
any accidents that might be caused by failure to evaluate such factors.
Failure to observe the above exonerates the Manufacturer from any
liability concerning equipment malfunction and consequently renders the
Warranty null and void.
When shipping/delivering the equipment to your Authorised Servicing Centre
always enclose a copy of the purchase document and a copy of the properly
compiled ID form.
If the unit is to be transported by courier, the postal service or rail it is
recommended such shipments be insured.
FURNACE DM
EN

TRANSPORT AND MOUNTING

b. Handling and/or moving the
equipment by gripping its
protective screen is strictly
forbidden.
c. Handle and/or move the
heaviest models with the aid of
suitable lifting gear.
153 of 272
5.3