Diono radian 3RX Mode D'emploi page 17

TOP TETHER
Use of the top tether is
RECOMMENDED for rear-facing
installations, if available.
A tether is designed to reduce
movement of a forward-facing
child restraint in a collision.
Vehicle tether locations can be found in many
locations within the vehicle. Some of the typical
locations are shown here. Please refer to your vehicle
owner's manual for exact locations, requirements,
and anchor identification points.
WARNING: Rear-facing top tether connector strap is
ONLY to be used in rear-facing installations.
1. Locate the track of vehicle seat that is bolted
directly to vehicle frame.
2. Wrap tether connecting strap around the track,
and thread metal "D" ring through the loop at the
end of the tether connecting strap. Pull strap to
form a knot.
3. Now, use metal "D" ring as an anchorage point
for top tether metal hook.
32
radian 3RX
REAR-FACING TOP TETHER INSTALLATION
INFANT SUPPORT
To ensure a better fit for smaller
infants, we recommend using
the infant head and body support
cushions included with your car
seat. The infant support also includes a removable
comfort wedge for body support. Use of these
cushions and wedge is optional and does not affect
the safety of the seat.
Slide the buckle through the buckle slot on the infant
body cushion that matches the slot chosen on the
seat.
diono.com
LEG OF SEAT TRACK
33