Feature Modes - Steiner RANGER LRF 10X42 Manuel D'utilisation

FEATURE MODES

Standard mode
No additional symbols are displayed and you are not in any special mode. The distance can be measured or
the scan mode can be activated.
Priority of a closer object
When more than one target object is aimed at, the closer of the two is selected on the display.
Priority of another object
This feature ignores objects, e.g. bushes, stones and branches.
If more than one target object is targeted, the more distant of the two is shown on the display.
Applicable for distance measurements even under extreme weather conditions.
All displays active
All possible symbols are visible on the display. The brightness of the displays can be adjusted in 6 different
levels by pressing the "
For the unit of horizontal distance or angle, select "M" (meters), " ° " (degrees) or "Y" (yards).
"HD" is displayed; it means that the horizontal distance to the target object is measured;
" " is displayed; it means the angle to the target object is measured.
20
" button in 6 different levels.