Aqua Medic LED FA 100 flex Mode D'emploi page 4

In purchasing this LEDspot, you have selected a top quality product. It has been specifically designed for
aquarium use and has been tested by experts. High quality components and latest technology as well as modern
design guarantee for enjoying your aquarium lighting for many years.
1. Technical Data
Line voltage: 100 - 240 Volt, 50/60 Hz (if not stated otherwise on the ID-label).
Lamps: 100 W: 96 LEDs / 200 W: 192 LEDs
Light colours: blue 455 nm, white 8,100 K in the ratio of 1:1.
Each LED has a single lens with a viewing angle of 60°.
The electronic ballast is placed in a splash-proof body on the light. The cooling element is made of anodized
aluminium. It is passively cooled.
Dimensions:
100 W: 290 mm x 180 mm x 130 mm (l x w x h)
200 W: 360 mm x 290 mm x 160 mm (l x w x h)
All heights without holder that is used to fix the light to the wall or ceiling
Weight: 100 W: app. 4.2 kg / 200 W: app. 7.1 kg
2. Unpacking
On unpacking, please check the light immediately for any damages. In case of any complaints, please contact
your dealer directly.
Included in shipment:
LEDspot with holder

Cable link for power supply and control cable

3. Safety advices
The light cannot be used as aquarium cover. It has to be mounted only above the aquarium. If it is mounted

above the aquarium, the minimum distance between lighting and aquarium must be at least 30 cm.
The housing may become hot during operation. Be cautious when touching it! For cleaning, disconnect

the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity enters the interior of the light!

Pay attention to a sufficient thermal exchange. Keep the ventilation slits always free! Do not mount

the system in enclosures or behind panels. Missing aeration may result in overheating and damage the
electrical components.
Do not try to repair the light (LEDs, electronic parts). Please send it in for checking, preferably with a list of

defects. Also, broken LEDs can only be exchanged by an expert.
When working on the light, always pull all power plugs.

4. Installation
The light has to be screwed on with the holder.
5. Repairs
Broken LEDs can only be exchanged by an expert.
Available spare parts: Please refer to www.aqua-medic.de.
4
Operation manual ENG
.