Proper Use And Operation; Safety Notes - SELFSAT SNIPE DOME 2 Manuel Utilisateur

1-2. Proper use and operation

This product has been designed for fixed installation on vehicles with maximum speeds of
130 km/h. The unit is programmed to automatically aims at geostationary television
satellites.
The power is supplied by a standard vehicle electrical system with a rated voltage of 12 or 24
Volts DC. For installations on the vehicle, use power input cable (cigarette lighter cable) to
supply power. For portable use, optional power adaptor produced by SNIPE series manufac-
turer must be used.
Use of the equipment for any other purpose to the one specified is not permitted.
Please also note the following instructions from the manufacturer :
• It is not possible to add or remove components on this product.
• The use of other components other than those originally supplied is not permitted.
• To complete installation, installer must strictly follow instruction in the supplied user manual.
Failure to follow the user manual may cause damage to the unit or user's vehicle.
• The product does not require any regular maintenance; all service must be carried out at
approved service centers.
• All relevant guidelines of the automotive industry must be observed and complied with.
• The equipment must only be installed on solid vehicle roofs.
• Avoid cleaning user's vehicle with the mounted satellite system in a drive-through car wash or
a car wash with a high-pressure cleaner.

1-3. Safety notes

Please carefully read and follow the operating instructions in this manual and use the
SNIPE DOME 2 for its intended purpose.
Upon installation of SNIPE DOME 2, please ensure the installation is done with supplied
cables and ensure the cables are not modified in any way.
As the user of this equipment, be responsible for ensuring compliance with the relevant
laws and regulations.
The manufacturer does not take liability for direct or indirect consequential damage of
the system, motor vehicles or other equipment by reason of unsuitable battery usage or
erroneous installation or wrong wire connection.
ENGLISH - 3