Junior Mode
(Forward Facing Mode / for Child 15–36kg)
Installation for Junior Mode
• Just use the vehicle seat belt when installing the child restraint in
the junior mode, do not use the infant insert or 5 point harness,
please store the shoulder harnesses, buckle and buckle tongues in
respective storage compartments.
• Please adjust the shoulder harnesses to proper length before store
the shoulder harnesses and buckle in their storage compartments.
• Please adjust the child restraint to proper angle Angle indication:
With top triangle and red triangle aligned.
• When installing and adjusting the safety belts, make sure that both
the shoulder belt and the waist belt are not twisted and will not keep
the safety belts from being properly positioned.
1. Press the red button to disengage the buckle.
2. Remove the infant insert and crotch pad.
• When installing the child restraint in the Junior mode, do not use the
infant insert.
3
1
3. Detach the snaps.
4. Lift the upper flap upward and pull the lower flap forward, and
then store the shoulder harnesses and buckle in their storage
compartments.
5. Pull the buckle to the back of the seat pad, and then store the buckle
and buckle tongues in respective storage compartments.
6. Do reattach the snaps to recover the seat pad. The reassembled seat
pad is shown.
4
2
30