Burigotto BAHIA Notice D'emploi page 27

For installation with ISOFIX (ISOFIX attachments
and top tether)
1. Fit the ISOFIX attachments guides with the ISOFIX attachments
anchor points. The ISOFIX attachments guides can protect the
surface of the vehicle seat from being torn. They can also guide the
ISOFIX attachments connectors.
2. Extend the ISOFIX attachments connectors by depressing on the
release button whilst pulling on the connector.
PUSH!
27
• Make sure that both ISOFIX attachments connectors are securely
attached to their ISOFIX attachments anchor points. The colors of
the indicators on both ISOFIX attachments connectors should be
completely green.
• The ISOFIX attachments connectors must be attached and locked
onto the ISOFIX attachments anchor points.
• Check to make sure the child restraint is securely installed by pulling
on the both ISOFIX attachments connectors.
• Select the desired recline position before moving back against the
vehicle seat, as once the top tether is attached and tensioned, the
recline angle will not be able to change without adjustment to the
top tether.
PUSH!
1
3. Press the ISOFIX attachments release button and push the child
restraint back against the vehicle seat until tight.