Citizen CT-E601 Mode D'emploi page 51

LED Functions
The tables below explain how to interpret LED indications.
1 2
Ethernet
1: Wired LAN transmission speed
Transmission speed
100 Mbps
10 Mbps/Not connected
2: Wired LAN connection/transmission status
Connection status
Connected
Not connected
Data transmission in progress
3: Wired/Wireless LAN status
Connection status
No printer connection
Printer No network con-
con- nection
nection
Connected by
wired LAN
Wired LAN opera-
tion
Connected by
wireless LAN *
Wireless LAN op-
eration *
Resource error
System error
* Only when using wireless LAN
3 1 2
LED (green)
Lit
Unlit
LED (yellow)
Lit
Unlit
Flashing
LED (green)
Unlit
Lit
Lit
Lit
Flashing
(2-second
cycle)
Flashing
(2-second
cycle)
Alternate flashing (1-second
Alternate flashing (0.2-sec-
3
Wireless LAN
LED (red)
— Board is not connected with a printer.
Unlit Board is connected with a printer.
Flashing Getting an IP address from the DHCP
server over wired LAN.
(1-second
cycle)
Lit Network operation being performed
over wired LAN.
Flashing Connecting to an access point or get-
ting an IP address from the DHCP serv-
(1-second
er over wireless LAN.
cycle)
Lit Network operation being performed
over wireless LAN.
Board is unable to operate normally.
cycle)
Board is unable to operate normally.
ond cycle)
– 51 –
1 2 3
Ethernet/Wireless LAN
USB host model
Description