Citizen CT-E601 Mode D'emploi page 31

Remove the partially cut paper before performing back feed for starting printing.
The cut paper may be torn off in the next printing process, which may cause a problem.
l Auto side shift (MSW8-6)
This function dissipates heat load during frequent heat generation by a vertical ruled
line or other specific head heating element.
If no data is received within 15 seconds after each cut or print, the print position is
automatically slid N* dots to the right. The original print position is returned to at the
next slide timing.
* N is the MSW8-6 setting value.
Notes
n If the right margin is too narrow, this may result in some print characters being cut off.
n This function is disabled under initial settings.
n To enable this function, use MSW8-6 to specify an appropriate value for the maximum slide
amount.
CAUTION
– 31 –