Citizen CT-E601 Mode D'emploi page 41

Names of parts
1: Panel button
Control this interface board.
2: USB 2 port
Connect a peripheral device.
Notes
n Only connect peripheral devices specified by our company to the USB port.
n Only plug in/remove peripheral devices when the printer power is turned off.
Pairing operation
You need to perform the operations below the first time you establish a Bluetooth con-
nection for Bluetooth data communication.
1. Detect Bluetooth devices
2. Configure pairing settings
1: Detecting Bluetooth devices
Confirm that Bluetooth is enabled on the host PC before searching for Bluetooth
devices.
This product will show up as "CT-E601_XX"(XX is last 2 digits of unique BD ad-
dress.) when it is detected.
Select this product from among the detected devices.
Note: You can search for devices and change the names.
When memory switch MSW13-5 is set to "No Response," nothing is displayed by
device detection.
With these settings, pressing and holding the panel button for at least three sec-
onds and then pressing it twice more places the product temporarily in a state
where it will be found in device searching (discovery mode).
Discovery mode cancels when the product is connected to a host PC.
1 2
– 41 –