•
If the water has reached the required
temperature, the "steam ready" indicator
(10) will come on.
•
Keep the steam button (9) pressed for
approximately 2 minutes to allow the
descaling agent to flow through the
appliance.
•
Switch off the steam generator (4) using
the on/off switch (5).
•
Switch off the iron (1) using the on/off switch
(2).
•
Remove the mains plug from the wall socket.
•
Leave the appliance for one night to allow
the descaling agent to descale the appliance.
•
Thoroughly rinse the water reservoir (13)
with clean water.
•
Loosen the cover (18) from the water
reservoir (13).
•
Fill the water reservoir (13) with clean water.
•
Tighten the cover (18) to the water reservoir
(13).
•
Insert the mains plug into the wall socket.
•
Switch on the iron (1) using the on/off switch
(2).
•
Switch on the steam generator (4) using
the on/off switch (5).
•
If the water has reached the required
temperature, the "steam ready" indicator
(10) will come on.
•
Press the steam button (9) to allow the
clean water to flow through the appliance.
Repeat this step until the appliance is
completely filled with clean water.
Storage
•
Store the appliance in the original packaging
when not in use.
•
Store the appliance in the upright position
to prevent damage to the soleplate.
•
Store the appliance in a dry and frost-free
place, out of the reach of children.
Disclaimer
Subject to change; specifications can be
changed without further notice.
15