CE Declaration of Conformity
and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 2014/30/EC (EMC); 2006/42/EC (MD) Annex II, part B
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. head-
quarters and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been
re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) Italy.
Number: 568/CL2SL
Manufacturer's Name:
Address:
Person authorized to compile
the technical documentation:
Product type:
Model / Type:
Accessories:
The undersigned, Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identi-
fied above complies with the provisions of the following directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmoni-
sation of the laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following
harmonised standards: EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to "partly completed
machinery":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amend-
ing Directive 95/16/EC (recast)
•
I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and
that the following essential requirements have been fulfilled:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
•
The manufacturer agrees to send the national authorities pertinent information on the partly completed machinery, in response to a moti-
vated request, without affecting its intellectual property rights.
•
If the "partly completed machinery" is operated in a European country with an official language other than the language used in this declara-
tion, the importer must include a translation with this declaration.
•
The "partly completed machinery" must not be operated until the final machine in which it is to be incorporated is declared to conform to
the provisions of Directive 2006/42/EC, if applicable.
Complies with the essential requirements pursuant to Article 3 of the following European directive, in relation to the use for which
the products are intended:
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment
and telecommunications terminal equipment and the mutual recognition of their conformity, in accordance with the following
harmonised standards:
· Health protection standards (art. 3(1)(a)): EN 62479:2010
- Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
- Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V1.9.2:2011, EN 301 489-3 V1.6.1:2013
- Radio spectrum (Art. 3(2)): EN 300 220-2 V2.4.1:2012
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 60335-2-103:2003+A11:2009
All parts of the product subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 17 January 2017
22 – English
Revision: 1
NICE S.p.A.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
NICE S.p.A.
Control unit for 1 or 2 24V DC motors
CLB207
FL200, PH200, ECCO5BO, ECCO5WO
Language: EN
Ing. Roberto Griffa
(Chief Executive Officer)