Bergstrom DAF Cool Ultimate Instructions De Montage page 22

DAF COOL ULTIMATE
EN
VALID FOR UNITS WITHOUT CENTRING DEVICES ON BASE
Lift the unit onto the cab. To lift the unit, it
7
is recommended to use (3) suction lifters
reference 1486986.
Carefully place the unit on the hatch opening,
making sure the silicone bead on the cab
roof does not move. Make sure the unit's
3 positioners are placed in their holes in
the chassis. Pass the recirculation sensor
connector (A) into the cab before fully resting
the unit.
Caution: If the silicone bead on the roof
is displaced during installation of the unit,
the unit must be completely removed and
the silicone reapplied. Displacement of the
silicone bead may cause water to enter the
cab.
Press the unit against the roof until the
8
stoppers in the base come into contact with it
and the roof's silicone fits with the base of the
unit to form a watertight seal.
22
A