Expedition Pro Accessories - Samson EXPEDITION PRO XPL100 Mode D'emploi

Expedition Pro Accessories

XPL200/XPL300 wireless compartment
(top view)
As shown in the illustration on the left, the top panel of the Expedition Pro XPL200
and XPL300 provides a prewired compartment that accommodates Samson wire-
less receivers: AM1 or UMl. Output signal from a wireless receiver mounted in an
XPL300 arrives at channel 2 of the onboard mixer.
In addition, a number of accessories are available from your local Samson dealer
that allow you to expand the capabilities of your Expedition Pro system. These
include:
• The DB1500 active subwoofer—the ideal complement to any Expedition Pro
enclosure (or to any loudspeaker system, for that matter)—pairs a power-
ful 500-watt amplifier with a heavy-duty 15" low frequency driver in order to
provide deep low end response. A built-in stereo electronic crossover allows
the DB1500 to operate either in mono or as a common subwoofer in a stereo
system. It features an all-steel grill and rigid corners, as well as an integral 1
3/8" pole-mount receptacle
• The RB 2030 rechargable battery cartridge, which provides up to two hours of
power to either the XPL200 or XPL300 from its dual Lead-Acid GelCel batteries.
• The MP1020 mounting bracket, which allows any Expedition Pro enclosure
to be "flown" or mounted on the wall or ceiling using standard OmniMount
hardware. For more information, see the "Positioning and Mounting the
Expedition Pro" section on page 12.
14