Batavus E-go E Serie Guide D'utilisation page 40

post, derailleur set, brakes, quick release levers for the wheels and
seat;
b. Failure to replace components such as brake/derailleur cables,
brake pads, tires, chain and cogs on time;
c. Climatological effect such as normal weathering of paint of chrome
rust.
Article 4 Warranty - components
4.1. During the warranty period, all components for which Batavus B.V.
confirms that there is a materials and/or manufacturing defect will be
repaired or replaced at the discretion of Batavus B.V. Any costs of
assembly or disassembly will be at the owner's expense.
4.2. As an exception to the provision of the paragraph above, labour
costs will be at the manufacturer's expense in case of material and/or
manufacturing defects in frames and forks within three years after the
purchase date.
4.3. Costs of transport of the bicycle and/or components to and from
Batavus B.V. will be at the owner's expense, unless the components
are covered by warranty.
4.4 If a certain component is covered by warranty and the original is no
longer available, Batavus B.V. will provide an alternative of equal or
greater value.
Artikel 5 Submitting a claim
5.1. Claims under this warranty must be submitted together with the bicycle
or the defective component for inspection through the Batavus dealer
where the bicycle was purchased. The proof of purchase as well as the
proof of ownership provided with the bicycle must also be provided to
the dealer.
5.2. If the owner has moved or the dealer is no longer available,
Batavus B.V. will state the nearest Batavus dealer upon request.
Artikel 6 Liability
6.1 A warranty claim honoured by Batavus B.V. does not automatically
mean that Batavus B.V. also accepts liability for any damages suffered.
The liability of Batavus B.V. shall never extend beyond the provisions
of these warranty conditions. Batavus B.V. shall in no case be liable for
40
40