Using The Device - Aspire Typhon 100W Manuel D'utilisateur

21

Using the Device

Notes on Using for the First Time
Please charge the battery fully before using the e-ciga-
rette for the first time. Use a dry cloth or cotton swab to
clean the clearomizer.
Power On/Off
Press the Fire button five times in rapid succession (wi-
thin 2 seconds) to turn the unit on, and five times to turn
it off again. Press and hold the Fire button for 3 seconds
while it is locked to shut down the device completely.
Press the Fire button five times in quick succession to
reactivate the device. We recommend that you turn off
your e-cigarette product during transport and when the
device is not being used for longer periods of time.
Locking/Unlocking the Setting Buttons
Press the Fire and "-" buttons at the same time in order
to lock or unlock the setting buttons. A lock symbol will
then appear on the display. Once the setting buttons are
locked, it is no longer possible to adjust the wattage and
temperature, but the Fire button will still work.
Stealth Mode
Press the fire button five times in quick succession to
switch to Stealth Mode. The display is switched off in
Stealth Mode, the Fire button works, but the "+" and "-"
setting buttons are locked. This function prevents you
from accidentally changing your vaping settings.
Selecting the Operation Modes
By pressing the "+" and Fire button at the same time
for half a second, it is possible to choose between the
"Wattage", "Voltage", "Bypass", "CPS" (C1/C2/C3), "TC"
(Ni, Ti, SS316L) and "TCR" (M1/M2/M3) modes. You can
navigate through the menu with the "+" and "-" buttons,
confirming your selection with the Fire button.