Extraflame Nordica Comfort Idro L80 Manuel D'instruction page 23

10
install the pre-assembly on the hearth. Secure the nuts and screws but keep them slightly loose. They will be tightened later.
Only the 3 screws (A) must be tightened permanently.
Use 6 self-threading screws 4.2x13
11
Adjust the structure so that the right and left rail supports are about 457 mm away (value measured from outside the 2
supports).
2 screws TE m5X16
2 nuts m5
2 washers Ø30
ENGLISH
A
23