Troubleshooting - Cedes cegard/Max C/CM Mode D'emploi

Installation and operation manual
7.

Troubleshooting

Emitter (Tx)
Indication
No function, door open
Door open, free protective area
Receiver R defective?
Emitter E defective?
R & E defective? Loose connections?
Light curtain blocked?

 = LED on  = LED off
© CEDES/May 2012
Green Yellow Action
  Check power supply / fuse
  Check for possible obstruction/cause:
  Replace receiver edge
 
  Connect control unit, connect E / R-edge with protective earth
  Remove obstruction
 = LED flashing
www.cedes.com
Receiver (Rx)
Proper installation
-
- EMC-interference
Protective earth (PE)
-
- Defect of control unit
Replace emitter edge
cegard/Max C/CM

0 ... 10 s
7