3-Connecting The Air Ventilation Kit To The Stove - MCZ KIT AIR Manuel D'installation Et D'utilisation

3-CONNECTING THE AIR VENTILATION KIT TO THE STOVE

CAUTION!
The electrical cables must not come into contact with hot parts of the stove.
The Air kit is installed using the following procedure:
• Remove the back of the stove by unscrewing the fastening screws
• Disconnect the pre-perforated panel for the switch, located on the back of the stove.
Technical Dept. - All rights reserved - Reproduction is prohibited
A
B
C
A -BACK OF THE STOVE
B - PRE-PERFORATED PANEL FOR THE SWITCH
C - AIR VENTILATION KIT
EN
29