oneConcept 10028891 Mode D'emploi page 25

of the cup instead.
If you have a problem with sticky ingredients clinging to the side of
the cup instead of being recirculated into the cutting zone.
1. Take the cup off the power base and tag the cup and blade as-
sembly on the counter to force the ingredients down into the
blades.
2. Replace the cup and blade assembly to the power base and
finish processing.
Cooking in the food processor cups
Unlike with conventional blenders or food processors, the food
preparation does not have to end here. Once you have prepared
your food, your food processor is then ready to cook it as well. Just
remove the blade, twist on a shaker/steamer top and place the cup
in the microwave. Seconds later.
1. Blend or pulse your ingredients together.
2. Remove the blade, twist on a shaker/steamer top and place the
cup in the microwave.
Caution: Do not put the blades in the microwave!
3. Cook until ready, then remove with an oven mitt and serve.
25