Security Instructions - oneConcept 10028891 Mode D'emploi

Warning: Danger of electrical shock
Read the following security guidelines carefully.
General safety guidelines
• Read the user manual before operating any appliance or equipment.
• To avoid risk of electrical shock, do not immerse the equipment in water.
• While plugging or unplugging a power cord, hold it by the plug. Never pull it by the cord.
• Do not operate any equipment with a damaged power cord.
• Check the voltage available at your home and ensure that it matches the voltage men-
tioned on your appliance before switching it on.
• Do not attempt to repair the unit in case of any malfunction. Always take it to an author-
ized service centre.
• Always keep the unit on a dry and flat surface.
• Do not use any attachments other than the ones supplied by or specified by the manu-
facturer.
• Always unplug the unit from the power source during lightning and thunder storms or
when the unit is not used for a long period of time.
• Never leave the unit unattended while in operation especially when children are around.
• All the equipment are for household use only. Do not use it for commercial purposes.
• All appliances and equipment are designed for indoor use. Do not use them outdoors un-
less specifically mentioned in the instruction manual.
• Do not connect the equipment to an extension cord or multiple socket adaptor. Always
connect the u nit to the mail socket. This is to prevent short circuits and sparking which
can shorten the life of the unit.
• Do not let the power cord hang over the edge of the table or work surface since a sharp
edge can damage the cable over a period of time. Do not let get it tangled or come into
contact with a hot surface.
• The unit can be cleaned with a damp cloth and immediately wiped dry. Do not use deter-
gents or chemical cleaning agents to clean the unit.
• Always clean cooking appliances soon after use. This will prevent food from sticking hard
to the u nit and possibility of bacterial growth.
• Never touch any appliances or equipment with wet or damp hands.
Safety guidelines for blenders
• Do not fill blender jars above the safety mark.
• Switch on the blender only after fixing the jar properly on the base.
• Operate the blender only after fixing the lid. never operate without the lid.
• Do not add material into the blender while it is operating.
• Never put hand, spoon or any similar item into the blender while it is operating.
• Take proper care while cleaning the blender jars and blades since they are very sharp and
can hurt you if carelessly handled.
• Prior to cleaning unplug the blender from the main power source.
16

Security instructions