GE GLDT690DBB Instructions D'installation page 9

STEP 11 – SECURE DISHWASHER TO
CABINET
The dishwasher must be secured to the countertop.
•Position the dishwasher so that the tub flange aligns
with the front face of the cabinet frame.
IMPORTANT -
dishwasher is centered in the opening and there is no
interference with adjacent cabinets when opening or
closing the door.
Figure 18
•Fasten the dishwasher to the underside of the
countertop with the 2 Phillips screws provided.
IMPORTANT -
flush. Protruding screw heads will scratch the top of the
control panel and can interfere with door closing.
Installation Instructions
Check to be sure the
Align Tub
Flange
to Front
Face of
Cabinet
Frame
Drive screws straight and
STEP 12 – CONNECT WATER SUPPLY
Connect water supply line to 90° elbow.
•Slide compression nut, then ferrule over end of water line.
•Insert water line Into 90 elbow .
•Slide ferrule against elbow and secure with compression
nut.
Figure 19
IMPORTANT -
that door spring does not rub or contact the fill hose or
water supply line. Test by opening and closing the door.
Re-route the lines if a rubbing noise or interference
occurs.
9
Compression Nut
Ferrule
Hot Water
90 Elbow 90 Elbow
Supply Line
Check to be sure