Stadler Form Anton Mode D'emploi page 8

Masquer les pouces Voir aussi pour Anton:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
• Do not use the appliance in immediate vicinity of a bath tub, a shower or a
swimming pool (observe a minimum distance of 3 m). Place the appliance
such that a person in the bath tub cannot touch the appliance.
• Do not place the appliance near a heat source. Do not subject the power
cord to direct heat (such as a heated hotplate, open flames, hot iron sole
plates or heaters for example). Protect power cords from oil.
• See to it that the appliance is properly positioned to ensure a high stabil-
ity during its operation and make sure that no one can trip over the power
cord.
• The appliance is not splash-proof.
• For indoor use only.
• Do not store the appliance outdoors.
• Store the appliance in a dry place inaccessible to children (pack the ap-
pliance).
• If the power cord is damaged, it must be replaced by the manufacturer
or a repair shop authorized by the manufacturer or by similarly qualified
persons in order to avoid a hazard.
• Prior to any maintenance, cleaning and after each use, switch off the ap-
pliance and unplug the mains cable from the socket.
Before setup: Anticalc cartridge and water hardness (optional ac-
cessory)
The anticalc cartridge reduces the limescale in the water and the undesir-
able emission of limescale particles into the surroundings. Effective for one
to three months, depending on water hardness (see table).
With a water hardness above > 7 ° dH, we recommend the use of the
anticalc cartridge (4) to inhibit lime deposits. Test your water's hard-
ness (= lime content) with the included testing strip (see page 4). If the strip
shows 2 pink boxes, your water hardness is > 7 ° dH.
1. Dip the testing strips into the water for a second
2. After around one minute, the results can be seen on the testing strips.
Some of the green boxes change colour into pink. The water hardness
is shown by how many boxes turn pink. Example: If three boxes are pink,
then the water hardness is > 14 ° dH.
Important: Soak the anticalc cartridge in a water bath for 24 hours before
the first use (not in the water tank!). The resin has to absorb water to reach
high performance.
The period of time that the cartridge is effective for depends on the hard-
ness of the water.
Number of
pink boxes
0/1
2
3
4
Water hardness hardness
Soft
Moderately hard From 7 ° dH
Hard
Very hard
Degree of
Cartridge will last for:
Days
(°dH)
(with 2.5 liter / day)
From 4 ° dH
140 days around 360 L
70 days around 180 L
From 14 ° dH 50 days around 120 L
From 21 °dH 25 days around 60 L
Liter

Publicité

Table des Matières
loading

Table des Matières