BASIC FUNCTIONS
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following
picture(banner) each time you switch channels:
Left Audio Status
Parental Lock
Channel Number
Channel Name
Signal Status
Program Information
Current Favorite
Press the Red (
) key in view mode.
Select the channel by pressing Numerical (
/
keys and select TV/RADIO key to move to TV or
Radio channel.
You will also see this picture each time you change channels.
When you press TV/RADIO key on the Remote Control Unit,
TV and Radio program are toggled.
Detailed program information
Press the Red (
) key twice while you are viewing a program.
First you will see the banner described above.
After pressing the Red (
) key a second time you will receive detailed
program information.
N N o o t t e e
: This service depends on service provider.
2. Volume Control
To control the volume level :
Press
/
keys to adjust the volume level.
Press MUTE key to turn to silence mode.
Press MUTE key again in order to cancel the mute function.
Right Audio Status
CAS Name
The number of soundtrack in current channel
~
) keys or
GB-10
D
I
G
I
T
A
L
S
3. Select Soundtrack
Press Yellow (
the soundtrack list.
Press
/
and
4. Select Videotrack
Press Yellow (
the videotrack list.
Press
/
and
5. Service List
Press
key to while you are viewing a program.
Select list by pressing TV/RADIO or FAV key.
The icon
behind the channel name
symbolises scrambled channel, and
the
icon behind the channel name
symbolises lock channel.
Select the channel by pressing
Press
key to watch that channel.
The colour key corresponds the following service list.
Green (
) key : Favorites
Yellow (
) key : Alphabetical
Blue
(
) key : Provider
Red
(
) key : Transponder
A
T
E
L
L
I
T
E
R
E
C
E
I
BASIC FUNCTION
) key to see
key to select one.
) key twice to see
key to select one.
/
,
/
.
GB-11
V
E
R