Proctor Silex 72706 Mode D'emploi page 5

How to Use
Read "Processing Tips" on page 7.
1.
Make sure processor is unplugged.
2.
Lock bowl onto base by aligning bowl
handle on right side of the base.
Turn clockwise until bowl locks into
place with handle toward front.
Place blade in bowl over center
3.
shaft. Turn until blade slips down
to bottom of bowl. Blade is sharp;
handle carefully.
Place food in bowl.
4.
Place cover on bowl and rotate
5.
clockwise until cover is locked into
place.
Plug into outlet.
6.
To turn on unit, press and hold
7.
the Pulse button for continuous
operation. To pulse, press and
release the Pulse button.
Remove cover. Unlock bowl by turning counterclockwise.
8.
Remove bowl from base. Carefully remove blade. Blade is
sharp; handle carefully.
Unplug.
9.
IF PROCESSOR DOES NOT START: Review the steps in "How
to Use" to make sure the bowl and cover are both in the
locked positions.
2
5
5