Troubleshooting - Medion MD 16623 Mode D'emploi

10. Troubleshooting

Problem
The shaving The shaving foil/cutter
performance blocks are dirty. You have
declines. not cleaned the shaver
thoroughly enough or it has
been too long since the last
cleaning.
Long hairs obstruct the cutter
blocks.
The shaving foil/cutter blocks
are damaged or worn.
Cause Solution
Clean the shaver thoroughly
before you continue shaving
(see "8.1. Dry cleaning" on
page 123).
Clean the shaver using the
supplied cleaning brush (see
"8. Cleaning and care" on page
122).
Replace the shaving heads
(see "9. Replacing the shaving
foil and cutter blocks" on page
123).
DE
FR
NL
EN
125 of 134