Drainage; Risk Of Frost; Water Temperature; 2.9.10 Safe Use Of The Product - BADU Jet Wave Traduction Du Instruction D'utilisation Originale

Safety
2.9.7

Drainage

An insufficient drain gap can damage the motor.
Do not block or seal the drain gap between the pump

housing and the motor.
2.9.8

Risk of frost

 Drain the pump/unit and pipes at risk of freezing in plenty of
time.
Remove the pump/unit during periods of frost and store it in a

dry room.
2.9.9

Water temperature

The water temperature must not exceed 35 °C.

2.9.10 Safe use of the product

Safe use of the product is no longer guaranteed in the following
instances:
• If the pipework is not in proper condition.
• If the pump seizes. See point 2.8 on page 12.
• If protective devices are damaged or missing, e.g. protection
against accidental contact.
• If there is stress on the pump/unit or pipes during installation.
14 EN 08|2020