Assembling The Dummy Plate - BADU Jet Wave Traduction Du Instruction D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 114
Fig. 26
6.4.2

Assembling the dummy plate

The following steps are necessary in order to assemble the
dummy plate:
1.
Observe the point See point 5.6 on page 39.
2.
Attach the dummy plate (30) under the support ring (28) and
fasten it to the main housing (1) using four tapping screws
(103). See "Fig. 12" and "Fig. 13" on page 26.
08|2020
Commissioning/Decommissioning
EN 43

Publicité

Table des Matières
loading

Table des Matières